In response to growing demand, KMT is pleased to bring you the Streamline SL-V 15 PLUS Intensifier. SL-V waterjet intensifiers are designed to deliver high levels of component reliability and system uptime. At the same time, they retain the ease of installation and maintenance that make our intensifiers the standard of the waterjet industry for both water and Hydrobrasive applications.
The SL-V 15 PLUS is designed to meet the cutting needs of low to high volume production in automotive and industrial markets. An extensive design effort has produced an intensifier with fewer parts and higher reliability. Its compact size, self-contained design, and outstanding operating efficiency make it the ideal choice for incorporation into Turnkey waterjet systems for a variety of applications.
Standard Equipment
- High efficiency heat exchanger in independent recirculation pump circuit
- High pressure safety dump valve
- High pressure accumulator (TUV approved)
- Water inlet shut-off valve
- Separate water and oil drip pans
- Electrical remote control interface
Standard Features
- Completely self-contained, minimum-footprint unit with built-in controls and motor starter
- Fewer parts than conventional intensifiers Variable displacement, pressure compensated hydraulic pump technology
- Standard dual-pressure control facilitates hole piercing and kiss cut applications
- 60,000 psi (4,137 bar) Operating pressure
- Pressure and directional control valves (pneumatically operated)
- Low voltage (24 VDC) internal controls for safety
- Noise levels under 75 dB(A)
- Exclusive long slow stroke Long life seal design provides reliable and improved service life
- Patented "Quick Plunger Removal" without disassembly of the hydraulic cylinder Cartridge-type hydraulic seal for quick changeout of replacement parts
- Closed-coupled electrical motor/hydraulic pump assembly
- Integral drip pan with fork lift access holes
- Low pressure water filtration
- Reduced cooling water requirements
- Complete user and maintenance documentation
- Meets CE regulations, CE Mark attached
| SL-V 100 Plus |
SAE |
Metric |
| Capacity |
15 hp |
11 kW |
| Operating Pressure |
60,000 psi |
4137 bar |
| Flow Rate |
0.26 gpm |
1.0 l/min |
| Maximum Orifice |
0.007 inch |
0.178 mm |
| Cooling Water Flow Rate |
2.0 gpm |
7.61 l/min |
| Length |
56 inches |
1422 mm |
| Width |
28 inches |
711 mm |
| Height |
33 inches |
833 mm |
| Weight |
1800 pounds |
816 kg |
| Pneumatic Supply Pressure |
80 psi |
5.5 bar |
| Hydraulic Oil Reservoir |
12 gallons |
45 litres |
| Hydraulic Pump Flow Rate |
12.9 gpm |
49 l/min |
IMPORTANT NOTICE: DUE TO A CONSTANT ENDEAVOUR TO IMPROVE THE MACHINE, THE SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.
lARGER MACHINES AND SPECIALS CAN BE CUSTOM BUILT TO YOUR REQUIREMENTS. |
|
