Glass Master - water jet glass cutting machineGlass cutting is an ideal application for Waterjet. Without any tooling or set up changes you can go from cutting the most delicate led light glass, through to the strongest 100mm (4″) thick laminated bullet resistant glass. The water jet glass cutting machine, Glass Master, produces a very fine cutting stream (approximately 1mm or 0.040″) enabling cutting of almost any shape. No matter how fine or intricate, with almost no load from the cutting process being applied to the glass, then as long as you can handle it, Water Jet Cutter can cut it.

  • Kitchen and bathroom splash backs
  • Frameless Shower screens
  • Mirrors
  • Balustrading
  • Laminated and Bullet-Proof Glass
  • Flooring inlay / table top inlay / wall inlay
  • Flat glass with numerous contours
  • Stained glass (crafts, church mosaics, lamp shades, etc.)

Specifications

Model i510 GM i612 GM i1713 GM
Machine Size (L x W x H)
(Does not include intensifier or bulk abrasive hopper)
14’ x 7’ 8” x 6’ 8”
(4200 x 2350 x 2050 mm)
16’ x 8’ 6” x 6’ 8”
(4900 x 2650 x 2050 mm)
19’ x 11’ 2” x 6’ 10”
(5800 x 3400 x 2100 mm)
Machine Weight (Without Water) 4440 lbs (2010 kg) 5140 lbs (2330 kg) 9040 lbs (4100 kg)
Machine Weight (With Water) 14900 lbs (6800 kg) 19180 lbs (8700 kg) 30000 lbs (13600 kg)
Cutting Table Size 5′ 1″ x 10′ 3″ (1550 x 3125mm) 6′ 1″ x 12′ 1″ (1860 x 3690 mm) 7′ 10″ x 14′ 5″ (2400 x 4400 mm)
Cutting Area* 4′ 7″ x 9′ 4″ (1400 x 2850 mm) 5′ 6″ x 11′ 3″ (1680 x 3450 mm) 7′ x 13′ (2100 x 4100 mm
Accuracy Of Motion 0.005″ (± 0.12mm) 0.006″ (± 0.15mm) 0.006″ (± 0.15mm)
Repeatability of Motion 0.001″ (± 0.025 mm) 0.002″ (± 0.05 mm) 0.002″ (± 0.05 mm)
Max. Air Speed 700 ipm (17.5m/min) 700 ipm (17.5m/min) 700 ipm (17.5m/min)
Max. Cutting Speed 700 ipm (17.5m/min) 700 ipm (17.5m/min) 700 ipm (17.5m/min)
Max. Material Thickness 8″ (200 mm) 8″ (200 mm) 8″ (200 mm)

* Cutting area without lifter installed

Want to find out more? Contact us now