As part of a GMM group company, Techni Waterjet can count on a solid sales and service network to support the expansion of the waterjet technology especially in the Europe market. The Intec-G2 series are machines specifically engineered for the … Continue reading →
Steve Murphy, Founder and MD of Planet Granite (North Warwickshire), has invested in a Techni Waterjet machine and has successfully grown his business. A truly inspiring story and a perfect example of how water jet versatility helps dealing with fast changing industries.
Luke Dopper, Assistant Manager at Recopak in Cobram (Melbourne), talks about his experience with Techni Waterjet as a customer. They are currently running 2 complete systems and experienced great benefits switching from Hydralic Pump to Techni’s Electric Servo Pump.
Aaron Chambers, co-owner of Aztech Cutting Solutions in Melbourne, talks about his experience with Techni Waterjet. They are currently running 3 of our Machines equipped with Techni’s patented and ultra-efficient ESP pumps.
[Video demonstrates the working of a 5 Axis Bevel Waterjet Cutting PAC 55 waterjet machine using Tru-Cut Technology.]
An increasing amount of businesses are looking for flexible manufacturing systems, to be competitive in the market. And TECHNI Waterjet recognize the need to develop a cutting system that gives customers the edge. The PAC55 representing precision and good control delivers flexibility while maintaining a high level of cutting accuracy.
The PAC operating software incorporates the Tru-Cut algorithms database, developed to determine the predicted taper at a given surface finish. This taper is then compensated for dynamically when cutting the path anywhere from O degrees to 55 degrees; giving you precision and good control of any part that can be produced on a XY abrasive waterjet cutting machine.
The PAC software has been developed to enable simple transformation from a two dimensional drawing to a complex 3 dimensional path by enabling multipass capability. Countersinks, weld preparations, and chamfers can be produced simply and easily on either or both sides of the part with a single setup.
The PAC55 is capable of producing parts with a true angle up to +/- 55 Degree with continuous rotation. The cutting head does not need to be repositioned, therefore, saving time and producing higher quality parts.
By incorporating patented Direct “Servo” Technology for the 4th and 5th axis, the PAC 55 is capable of positioning accuracy to +/- 12 arc min[0.2degrees] with rapid acceleration and positioning speeds. It is the fastest and most accurate 5 axis water jet cutting head available in abrasive water jet cutting.
The PAC 55 incorporates Precision Terrain Mapping on the surface of the material to be cut. This information is then used to maintain an exact standoff distance between the nozzle and the workpiece; resulting in more accurate parts than any other 5 axis head on the market. As material flatness varies and standoff changes, so does the geometry of the path being cut. So a constant, accurate standoff is critical when angle cutting. And the greater the angle the more critical it becomes.
All our glasses are capable of being pre-processed, because the water jet is so precise in what it can do to a splashback, a toughened safety door, a mirror, to the strictest tolerances to any customers requirements. And basically what this has done for us is that it has allowed us to improve output considerably.
– Rubber slats to resist scratching and frosting.
That we were lucky enough to fall into very innovative company called TECHNI Waterjet.”
– 24 hours support and customer service.
3 or 7 O’clock at night and when you get their support, it is just unbelievable. Incredible, within half an hour we had the technician here; and it was all done. Just fantastic.
– Simple To Operate Patented Design EZY-LOAD
And it solved lots and lots of problems in some complex glass cutting.
The difference is phenomenal, the savings tremendous.
Glass Master – Proudly manufactured by TECHNI Waterjet.
Thank you to :
Ted Oberg – Sydney Glass
Lee Thurbon – Bevelite
Jim Kriaris – Dream Haven Glass
Dekton is extremely hard, making it very slow and difficult to cut with bridge saws. Waterjet cutting can produce mitred edges, ready for assembly, in minutes. Waterjet cutting has many advantages oversaws when cutting man made stones such as Dekton.
The video shows a complete Dekton counter top fabricated in under 30 minutes!
I am amazed at the ability of the 5 axis cutting head to prepare mitred components for both natural stone, as well as the very hard man made stones such as Dekton.
Some Waterjet Dual Cutting Head Features Shown In The Video
Softec Software for Dual Cutting Heads.
Individual Cutting Head Positioning.
Dual Cutting Head Positioning.
Independent Z Axis Positioning
Synchronized Z Axis Positioning
Quantum NXT Electric Servo Pump
Large color touch screen HMI for on board diagnostics
Capabilities up to 66,000 PSI
Quickly and Easily Position the Dual Cutting Heads
With Dual Cutting Heads, you can cut the same shape with different lengths between the cutting heads.
Remote Control Pendant adjusts dual cutting heads for easy set up.
Distance between dual heads is determined by the Waterjet Operator.
The power Z-axis allows for easy height adjustment of the cutting heads.
Our unique Break Away Head configuration automatically shuts down the machine should one of the cutting heads come in contact with a foreign object such as a fixing clamp.
Thanks for watching today. Hope you guys learn something new about our capabilities. We have lots of features lots of options available on TECHNI Waterjet’s different machine sizes, starting from three by five (3×5), going up to ten by twenties (10×20), a lot of sizes in between. Take a look at the website. Please contact us if we could give you any more information. And again, thanks for watching and have a good day.