Compact, Simple, Capable
Intecâ„¢G2 Cantilever Series
The Intec™G2 Cantilever Series brings serious waterjet performance to tight spaces. With a flying bridge that opens three sides for easy loading and unloading, these machines are simple to operate, energy-efficient, and deliver clean, accurate parts without heat-affected zones. Choose the ultra-compact i35 when floor space is limited, or step up to the mid-size i510 to handle most common projects: both retain the same high-quality components and precision you expect from TECHNI. Typical use cases include prototyping, education, soft materials, and mixed-material job-shop work. Ramp into harder materials by pairing with the right pump.
Key Features of the Intecâ„¢G2 Cantilever Series
Small footprint options that fit almost anywhere
(i35 footprint 1700 × 2600 mm).
Three-sided access for fast, safe loading and unloading.
Optional PAC60 5-axis head for bevel cutting and taper compensation (i510).
Energy-efficient operation with Quantum pumps; draws power only when the cutting head is open.
Intecâ„¢G2 Cantilever Series Specifications
i35-G2
Waterjet Cutting
Machine
| Footprint | 2652 mm × 1583 mm (104″ × 62″) — ideal when you’re worried about space. |
| Form factor | Cantilever with flying bridge; open on three sides for easy access. |
| Highlights | Compact, user-friendly, very low energy consumption; ideal for prototyping & education. |
| Pump pairing | Quantum VP 22/60 for softer materials; step up to ESP 37/66 for harder materials. |
| Notes | Same high-quality components and high tolerances found across all Intec-G2 systems. |
| Materials that can be Cut | Listed here |
| Price | Enquire for Price |
| Brochure | Download |
i510-G2
Waterjet Cutting
Machine
| Cutting area | 1525 × 3050 mm (5′ × 10′) — the sweet spot for most jobs. |
| Footprint | 4200 mm × 2350 mm (165″ × 92″); pump cabinet footprint 1300 mm × 540 mm. |
| Access | Flying bridge opens three sides for effortless loading/unloading. |
| Head options | PAC60 5-axis for bevel cutting and taper compensation with no loss of cutting area. |
| Highlights | Compact, user-friendly, very low energy use; perfect for larger, more complex projects on a small format. |
| Materials that can be Cut | Listed here |
| Price | Enquire for Price |
| Brochure | Download |
Best For / Applications
Match the Cantilever Series with Quantum VP 15/52 (Light Series) for low power draw and everyday cutting, or upgrade to Quantum ESP 37/66 (Power Series) for tougher materials. The compact light series (1300 × 540 mm) tucks in easily beside the machine, while servo technology helps minimize energy use by delivering power primarily when the cutting head is open.
STANDARD FEATURES
Intecâ„¢G2 Series
CNC WATERJET MACHINE
- Remote Control Pendant
- Break Away Head
- Tech-Senseâ„¢
- Water Raise & Lower
- Servo Z Axis
- ABRASIVE PUMP AND HOPPER
Remote Control Pendant
The MPG allows to manually wind forward or backward through a cutting path. This enables the operator to find the exact point along a cutting path from which to re-start cutting after a stoppage or to accurately locate a pre-cut part.
Break Away Head
When the cutting head inadvertently crashes into a clamp or fixture or hits the edge of a work piece or an upturned part, the Break Away Head will detect the crash and automatically stop the machine.
Tech Sense
With our new variable abrasive feeder, garnet supply to the cutting head is automatically adjusted by the software, e.g. during low pressure piercing. In addition, the Tech-Senseâ„¢ Monitoring System enables truly unattended operation. After an interruption, the cutting program can be easily resumed.
Water Raise & Lower
Automatic water Raise/Lower at the push of a button for submerged cutting: our tanks include airtight welds of an air chamber which uses regular shop air pressure. No moving parts are required, an on/off solenoid valve allows water level adjustment within a few seconds.
Servo Z Axis
Programmable Z axis with auto height position recall, laser terrain mapping and edge location optics.
ABRASIVE PUMP AND HOPPER
The hinged lid on the hopper system allows easy access to inspect and fill at any time, without the need to de-pressurize. The clear pump chamber allows a quick visual to ensure abrasive is present and flowing correctly.
REMOTE CONTROL PENDANT
Remote Control Pendant
The MPG allows to manually wind forward or backward through a cutting path. This enables the operator to find the exact point along a cutting path from which to re-start cutting after a stoppage or to accurately locate a pre-cut part.
Break Away Head
Break Away Head
When the cutting head inadvertently crashes into a clamp or fixture or hits the edge of a work piece or an upturned part, the Break Away Head will detect the crash and automatically stop the machine.
Tech Sense
Tech Sense
Tech Sense monitoring system provides the ability to run a night shift without the need for an attending operator. Should the cutting be disrupted e.g. blocked nozzle, the machine will pause the program and send a text message to your cell phone (SMS Notification option must be fitted.)
Water Raise & Lower
Water Raise & Lower
Automatic water Raise/Lower at the push of a button for submerged cutting: our tanks include airtight welds of an air chamber which uses regular shop air pressure. No moving parts are required, an on/off solenoid valve allows water level adjustment within a few seconds.
Servo Z Axis
Servo Z Axis
Programmable Z axis with auto height position recall, laser terrain mapping and edge location optics.
ABRASIVE PUMP AND HOPPER
ABRASIVE PUMP AND HOPPER
The hinged lid on the hopper system allows easy access to inspect and fill at any time, without the need to de-pressurize. The clear pump chamber allows a quick visual to ensure abrasive is present and flowing correctly.
